A study of Bradfield City’s First Building green roof confirms that combining native rooftop gardens with solar panels reduces urban heat, increases renewable energy generation and supports local biodiversity.
The research verified that the biosolar green roof increased solar energy generation by up to 23.25 per cent during extreme heat events, while reducing roof temperatures by up to 28°C compared with a conventional roof. The study also found the roof retained an average of 73 per cent of stormwater runoff, removed more than 90 per cent of key pollutants and supported 39 species of birds, insects, mammals and gastropods, demonstrating the benefits of integrating green infrastructure into urban development.
The comprehensive performance assessment of the 1,300-square-metre biosolar green roof was led by the University of Technology Sydney (UTS) in collaboration with the Bradfield Development Authority (BDA).
As the first building delivered in Bradfield City, the 3,000-square-metre First Building showcases sustainable design through its use of low-carbon timber, rammed earth walls and an integrated biosolar roof. The building has already received multiple awards for architecture, design and sustainability.
For four months over summer 2025, the research team tracked and evaluated the performance of the biosolar roof across five areas: photovoltaic (PV) panel efficiency, biodiversity, stormwater filtration, air quality, and heat. By installing solar PV arrays directly over the green roof footprint, the configuration allows the vegetation to naturally cool the rooftop microclimate, enhancing solar panel efficiency, while the panels provide partial shade to support the growth of the plants below.
Lead researcher, UTS Associate Professor Peter Irga, said the BDA project provided a unique opportunity to measure the performance of a biosolar roof without the influences typically present in an established urban environment.
“Usually, when we test a green or biosolar roof, the data is heavily distorted by surrounding urban factors such as traffic pollution, drainage issues and the urban heat trapped by other buildings,” Associate Professor Irga said.
“Because broader city-building activities had not yet commenced around First Building, we were able to obtain a much cleaner baseline to accurately assess the performance of the biosolar roof. The findings provide a robust, data-driven blueprint to inform future development across Bradfield City.”
In Australia, one of the major challenges for solar generation is high temperatures. Solar panels perform most efficiently at 25°C, with efficiency dropping by up to 2 percent for every degree above that threshold.
The First Building’s biosolar roof addresses this challenge by combining 319 north-facing solar panels with more than 14,000 native Cumberland Plain plants. Through evapotranspiration, the vegetation cools the surrounding environment, enabling the solar panels to outperform those on a conventional roof by an average of 11.1 percent during summer, with peak gains of up to 23.25 percent on very hot days. During extreme heat events, the biosolar roof was up to 28°C cooler than a conventional aluminium roof.
The study also found significant biodiversity benefits, as well as significant water quality and stormwater management benefits. The findings demonstrate the effectiveness of Bradfield City’s Master Plan framework, which requires 80 percent of suitable roof space on new buildings within Bradfield City to incorporate green or biosolar roofs.
The report ‘Green and Bio-Solar Roof Performance Assessment for Bradfield City Centre First Building’ is available for download from: https://figshare.uts.edu.au/articles/report/Green_and_Bio-Solar_Roof_Performance_Assessment_for_Bradfield_City_Centre_First_Building_-_Abridged/32527281?file=65804979